T-Line Safety System
T-Line Safety System
An Introduction to the T-LINE Safety System A REVOLUTIONARY NEW DEVICE FOR USE IN THE FIELD OF FALL PROTECTION. The system offers a level of versatility and safety that is unmatched by any other temporary fall protection system. The T-Line Safety System is a device that facilitates both horizontal and vertical movement offering unprecedented levels of freedom for the user. Just as suited to situations that require only horizontal or vertical movement, the T-Line Safety System is perfect for users with varied and often changing fall protection needs.
Innovative Design 2 lifelines on separate spools Self Retracting, Self Locking Quick and Easy Installation Span up to 12m or 24m as standard No Tensioning or Adjusting required Suitable for permanent or temporary installations Safe, Hands-Free Movement Along platforms and walkways Access to work areas Continuous protection Increased Safety Reduced fall distance compared with standard equipment Reduced swing fall risk Integrated rescue system
Conforms to EN and ANSI standards
Specifications
|
T01 12m |
Maximum Span 12m Maximum Vertical Range @ 12m Span 6m @ 6m Span 12m Maximum Fall Arrest Distance 1.8m Maximum Fall Arrest Force 6kN Anchorage Requirement 19kN Wire Rope Min Breaking Force 17kN Wire : 5mm Diameter, 7x19 Strand Weight 22.5kg |
|
|
|
Use Height It is recommended that the 12m T-Line is installed at 4m above the work platform when at maximum span to minimise the free-fall and cable intrusion. |
|||
|
T01L 24m |
Maximum Span 24m Maximum Vertical Range @ 24m Span = 20m @ 18m Span =18m @ 12m Span =12m Maximum Fall Arrest Distance 1.8m Maximum Fall Arrest Force 6kN Anchorage Requirement 19kN Wire Rope Min Breaking Force 17kN Wire : 5mm Diameter, 7x19 Strand Weight 29kg Requires a trained installer |
|
||
|
Use Height It is recommended that the 24m T-Line is installed at 5m above the work platform when at maximum span to minimise the free-fall and cable intrusion. |
||||
|
T-Line Installation The T-Line must be installed above the user. The 24m T-Line requires a specially trained installer to perform the installation. For inclined installations the T-Line should be installed below the pulley. A maximum of 30 degrees use angle is recommended. Refer to the installation and user manuals for further instruction. Installation Height It is recommended that the 24m T-Line is installed at 5m above the work platform when at maximum span to minimise the free-fall and cable intrusion. The 12m T-Line should be 4m above the platform Where this is not possible then the T-Line Technical Support Team can advise on installation methods to overcome any issues. |
||||
Special Installations
The T-Line can be installed in a large variety of situations. For special requirements please contact the Technical Support Team for advice and guidance.
Single Line Mode
The T-Line can also be used in a single line mode. In this configuration the second line must be anchored to the T-Line or separate approved fall arrest anchor point.
Rescue
The T-Line has an integral rescue system. This device enables the rescue of a worker by drawing them back towards the T-Line device. This ensures that the fallen worker can be rescued in the shortest possible time and can also prevent additional risk to the rescuer
T-Line Applications
The T-Line can be used in a variety of applications including:
- Tanker Wash Bays
- Truck Loading
- Conveyor Belt Safety
- Manufacturing
- Maintenance
- Access
- Construction
- Confined Space
- Telecommunications
- Aerospace
Its unique design means that it can be used where traditional fall protection devices cannot. Allowing the user to move freely in all directions while also passing obstacles means that the T-Line prevents the risk of a fall while not connected during transfer from one system to another. The extremely low fall arrest distance mean that the T-Line can be configured to provide fall protection even when working in low areas such as on a flat bed truck.
