Pewag PLDW Winner Prolift Delta Lifting Points
PLDW pewag winner profilift delta
Sizes from M8 to M48
In development from pewag: a ball-bearing loaded, 360° under load rotatable lifting point. High resistant lifting eye 180° movable. Special screw of grade 10.9 material, which is 100% crack-tested as well as protected against corrosion, and marked with WLL and thread size. It can be thightened with a hexagon wrench or spanner wrench. Each lifting point is marked with an individual serial number, that allows traceability. pewag winner profilift delta is optionally also available with special designed thread lengths. The table with the load capacities depending on the method of lifting as lifting
gear, number of legs and angle of inclination is a part of the user manual and packed together with each lifting point.
The pewag winner profilift delta lifting points are marked with a WLL for the most inappropriate field of application, which explains the increased WLL in the upright loaded position, with a 4-fold safety against break in all directions of load.
Permissible usage
Load capacity acc. to the inspection certificate respectively table of WLL in the mentioned directions of pull – see picture 1.
Non permissible usage
Make sure when choosing the assembly that improper load can not arise eg if:
• the direction of pull is obstructed
• direction of pull is not in the foreseen area (see picture 2)
• loading ring rests against edges or load (picture 3)
For more details please have a look into our detailed user manual.
To calculate the necessary thread length (L):
L= H + S + K + X
H = Material height
S = Thickness of the washer
K = Height of the nut (depending on the thread size of the screw)
X = Excess length of the screw (twofold pitch of the screw)
In case of requesting a lifting point with a special thread length, please mention the requested thread length `L’.
Pewag Lifting Points Specifications